Two rugged aluminium 40-footers from competing french yards make an interesting comparison. Fran\u00e7ois Tregouet tests the Allures 40.9 and Ovni 400Back in the mid-2000s the niche market for aluminium centreboarders was disrupted by the arrival of a new upstart, Allures Yachting. Until then, the undisputed market leader was French company Alubat, builders of Ovni at Les Sables d\u2019Olonne.
\nLast autumn Alubat launched the Ovni 400, a substantial evolution of its original concept, which we went to test sail in Les Sables. Then, just a few days later, it was the turn of competitor Allures to reveal its new 40.9. The opportunity to carry out a comparison of these two ocean cruising prospects was too timely and tempting to ignore.
\nThe original Ovni concept dates back to the 1970s. With their shoal draught and raw, chined aluminium hulls, Ovnis have captured the imagination of serious ocean sailors over the past four decades. More than 1,500 Ovnis have been built, and fulfilled thousands of sailors\u2019 bluewater cruising dreams. Jimmy Cornell famously completed a five-year circumnavigation aboard his Aventura III, an Ovni 43.
\nArticle continues below\u2026<\/p>\n
\t\t\t\t\t\tHallberg-Rassy 40C review: Is this really the Swedish yard\u2019s best boat yet?<\/p>\n
\t\t\t\t\t\t\t\u201cThis is the best sailing boat we\u2019ve ever built,\u201d enthuses Magnus Rassy about the new Hallberg-Rassy 40C. The company CEO\u2026<\/p>\n
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\u00a3589,900.00<\/p>\n
\t\t\t\t\t\tHow to sea trial a boat: Professional boat testers share their top tips<\/p>\n
\t\t\t\t\t\t\tYacht brokers don\u2019t really sell boats, they sell dreams. To buy any sailing yacht requires a leap of faith: a\u2026<\/p>\n
In 2003 engineers St\u00e9phan Constance and Xavier Desmarest created Allures Yachting, with the ambition of revitalising the aluminium centreboarder concept. Starting with a 39.5 the Cherbourg-en-Cotentin-based yard quickly extended its range to 45ft, then a 50-footer.
\nBut after the economic crisis of 2008, demand shrank and this specialised market was challenged by an ever-increasing number of competitors. Alubat began to appear unreactive. It was even close to disappearing in 2014, when it was taken over by a consortium of shareholders that loved the brand.
\nThe Ovni 450 was launched, a refinement of the 445 aimed to innovate without alienating existing customers. Now, however, comes the Ovni 400, marking a real breakthrough.
\nThe beamy hullshape of the Ovni 400 packs plenty of volume. All Ovni photos: Fran\u00e7ois Tregouet
\nOvni 400
\nWith this new design it is quicker to list what hasn\u2019t changed: its 100% aluminium construction, centreboard keel and suitability for long-distance cruising are the main elements which remain the same.
\nAt first glance, the shape of the hull is the biggest difference. The freeboard is almost vertical; the first curve is close to the waterline and its considerable beam extends almost all the way to the transom.
\nIt has a rounded, slightly inverted bow, extended by a solid aluminium bowsprit. The bow section finishes one third of the way back, and sports a muscly volume visibly influenced by the box rule hulls of the Mini, Class 40 and IMOCA classes.
\nSlab-sided hull is rounded below the chine
\nThis is combined with a short coachroof and vertical windows, and a clear and uncluttered foredeck that takes little water over the deck. The boat is secure to manoeuvre around on, with wide panels of non-slip and a longitudinal foot brace that runs centrally down the foredeck. Once at anchor, the foredeck area can become a double-bed sunbathing area.
\nThe form and function of the boat almost makes you think of a catamaran \u2013 a connection that the Ovni 400\u2019s architects, Alain Mortain and Yanis Mavrikios, are at no pains to deny.
\nAll sail handling can be done from the cockpit, and canvas is hoisted or unfurled from the shelter of the huge companionway canopy. This rests against a solid arch, made of aluminium, which also supports the double mainsheet. When seated at the forward end of the cockpit benches, or on the coaming, you have a particularly well-sheltered watchkeeping station.
\nCockpit is secure for helmsman and crew, but particularly under the canopy
\nAt the stern, the twin wheels offer flexible helming: each wheel can be used sitting or standing facing forward, or sitting on the coaming to fix your eyes on the gennaker luff.
\nThe twin rudders respond rapidly, and the genoa sheet winches, which are centred within easy reach, allow the helmsman to fine tune the sails without disturbing the crew. They can sit comfortably installed, well wedged-in, at the solid teak and lacquered aluminium cockpit table.
\nIt takes time to learn how best to sail this modern hull. There is power, for sure, but also plenty of wetted surface area, so you have to find the right angles of wind and heel to optimise performance in light airs and breezier conditions. Under engine (a 50hp Volvo saildrive) the Ovni reaches 6 knots at 2,200rpm.
\nThe airy forward cabin with an island double berth
\nBut it is the Ovni\u2019s comfort, ergonomics and stowage that impress most. The yard\u2019s great experience and customer feedback all show their hand here.
\nAmong the most striking points we liked were the large, rectangular bed in the forward cabin, and panoramic coachroof windows, which give a 180\u00b0 view from the sliding companionway door. The light joiner work and d\u00e9cor give an uncluttered, modern look.
\nPractical touches include refrigerator drawers in the galley, which can be opened when the yacht is heeled; a large, and easy to clean moulded heads compartment in the starboard aft cabin; and a proper machinery room \u2013 a must for any bluewater sailor \u2013 that is accessible from the interior or the cockpit.
\nGalley with sensible handholds and fiddled worktops is to port
\nA few details from the first boat need attention, such as protection for the throttle and perhaps fitting the arch slightly further aft.
\nHowever, this is a serious candidate for bluewater voyaging. And with serious voyaging in mind, the buyer of the hull in build during our visit to the yard is having his boat equipped with a rigid doghouse to protect crew from any heavy weather.
\nAllures 40.9
\nAllures unveiled its latest model at last season\u2019s La Rochelle Boat Show. Anyone familiar with the Allures 39.9 might recognise the deck layout and lines, but many changes have been made here.
\nThe Allures\u2019 deck and superstructure are composite, which allows a more sculpted shape than welded aluminium plate. Photo: Jerome Houyvet
\nAlthough the interior layout remains more or less the same, the leap in quality initiated by its designer Isabelle Racoupeau \u2013 wife of the yacht\u2019s naval architect Olivier Racoupeau \u2013 has changed things substantially. The Allures 40.9\u2019s warm joinery and the attention given to the finishing details makes its predecessor seem dowdy by comparison.
\nFrom the stainless steel fiddles at the navstation to the leather-covered reading lights and the white Corian inserts in the saloon table, there is an overall feel of luxury.
\nWireless light switches are within easy reach and no longer hidden in the ceiling. It\u2019s these type of small details that give an overall impression of stylishness whilst remaining seamanlike.
\nCoachroof portlights allow natural light to flood into the 40.9\u2019s saloon. Photo: Jean-Marie Liot
\nThe large roof hatches and five hull windows on each side generate plenty of light. The hull windows are aligned horizontally, so they enhance both the exterior aesthetics and the view from inside.
\nAt sea, the slightly raised chart table and the U-shaped galley positioned close to the companionway allow the off-watch to keep an eye on the outside while staying warm and dry.
\nThe saloon occupies the entire width of the hull, and the saloon table hides the centreboard well. There are a large number of stowage spaces on three levels on each side: under the seats; behind the backrests and under the side decks.
\nA U-shaped galley is to port, forward of the companionway. Photo: Jean-Marie Liot
\nFitted on this boat was good quality insulation foam (optional), which limits temperature changes and avoids any risk of condensation on the inside of the aluminium hull. The deck is of composite construction.
\nThis use of an alloy\/composite combination is something that has been well mastered in superyacht builds as well as in aeronautical construction. The saving in production time for the shipyard is obvious, as the interior can be built while the hull is open and without passing the furniture through the companionway hatch. It is not only an economic advantage; the use of a mould also allows the development of different deck shapes, a high level of finish, and better insulation.
\nAs for the aluminium hull, owners love the fact that the lack of paintwork means there is one fewer item of regular maintenance to worry about, and anyone who craves colour can still have the design of their choice with the now-standard vinyl hull wrap.
\nPhoto: Jerome Houyvet
\nOn our test sail we had between 15 and 18 knots of wind, and the Allures 40.9 seemed so easy. At 40\u00b0 off the apparent wind, we were making 7 knots, and between 8 and 9 knots once we bore off to 115\u00b0.
\nI had another opportunity to sail this boat last year in over 25 knots of wind, and my impression then was equally good.
\nIn quite rough seas the boat hardly took any water over the deck and was sailing at more than 9 knots downwind in spite of having only a jib and mainsail. The only boats overtaking us that day were coastal or ocean racing yachts.
\nWith over 20 knots of wind to get back to Cherbourg, we sailed dead downwind, sails goosewinged as if we were in the tradewinds \u2013 albeit not so warm. We\u2019d have liked to hoist a gennaker on the solid bowsprit, to lengthen her stride.
\nBut on this point of sail, and with a swell starting to build, you get the best of the smooth movement that centreboarders provide, and it\u2019s a behaviour that always pleasantly surprises anyone not familiar with this configuration.
\nThe same is true of harbour manoeuvres, especially when going astern. Guided by the twin rudders, and helped by the bow thruster, the Allures 40.9 smoothly slipped into its berth like a hand into a glove, despite a strong crosswind.
\nPhoto: Francois Tregouet
\nHead to head verdict
\nBoth the Alubat and Allures yards clearly have a technical mastery of their builds. To be convinced of this, you only have to look at the electrical installations. The very high level of quality on both builds dispels any fears about the risk of electrolysis.
\nThe metalwork on both boats is beyond reproach, stowage space is abundant, there are well-placed handrails everywhere and the capacity of the tanks gives all the self-sufficiency you could require. The specifications (below), indicate how evenly matched they are in some areas. So, which one would you choose?
\nThe Allures and Ovni, close though they may appear to be, actually have very clearly differentiated personalities, and it is on this basis that owners will most likely make their choice.
\nThe large and powerful Ovni will seduce those seeking to conquer muscular seas. The sleeker Allures will win the hearts of those who like to travel light. With the Ovni it is possible to customise the (aluminium) deck layout, while the Allures offers the versatility of a glassfibre deck construction.
\nBoth Alubat and Allures deserve praise for the fact that the competition between them has pushed each company to innovate and improve their designs.
\nCentreboarder + Aluminium = Instability + Electrolysis?
\nThousands of aluminium centreboarders have been cruising the world over the last 50 years. But myths die hard. A centreboarder is surely less stable than a keelboat? That\u2019s simply not true. The standards for stability are the same for both. The downside is that the ballast on the centreboarder is higher up, so it requires more ballast to achieve the same righting moment.
\nA boat of the same length and sail area will be a few hundred kilos heavier \u2013 a disadvantage in light airs. On the other hand, the stability is very similar with the centreboard up, so you\u2019re able to sail downwind in very little water or in rough seas.
\nThe layman may also be worried about electrolysis in aluminium yachts. To dispel this biggest myth: the weak alloy of a lost penny dropped in the bilge won\u2019t work its way through the 10-15mm of solid aluminium hull.
\nUltimately, the electrical installations by shipyards such as Allures and Alubat are first class. Current leakage testers are a standard fit, warning of any deterioration, but also of possible problems if additional equipment is installed during the long life of the boat.
\nAllures 40.9 specification
\nLOA: 12.65m \/ 41ft 6inBeam: 4.15m \/ 13ft 7inDraught: 1.06\u20132.75 m \/ 3ft 6in\u20139ftDisplacement (lightship): 10,900kg \/ 24,030lbUpwind sail area: 82.5m\u00b2 \/ 883ft\u00b2Cabins: 2-3Engine: 50hpWater capacity: 330lt \/ 73galFuel capacity: 400lt \/ 88galStarting price: \u20ac313,000 (ex. VAT)Price as tested: \u20ac374,029Design: Berret Racoupeau Yacht Design
\nOvni 400 specification
\nLOA: 12.90m \/ 42ft 4inBeam (max): 4.35m \/ 14ft 3inDraught: 0.98\u20132.88 m \/ 3ft 3in\u20139ft 5inDisplacement (lightship): 11,200kg \/ 24,692lbUpwind sail area: 85m\u00b2 \/ 915ft\u00b2Cabins: 2-3Engine: 50hpWater capacity: 400lt \/ 88galFuel capacity: 540lt \/ 119galStarting price: \u20ac309,000 (ex. VAT)Price as tested: \u20ac420,045Design: Mortain & Mavrikios
\nFirst published in the October 2020 issue of Yachting World.
\nThe post Allures 40.9 vs Ovni 400: French aluminium centreboarders go head-to-head appeared first on Yachting World.<\/p>\n","protected":false},"excerpt":{"rendered":"
Two rugged aluminium 40-footers from competing french yards make an interesting comparison. Fran\u00e7ois Tregouet tests the Allures 40.9 and Ovni 400Back in the mid-2000s the niche market for aluminium centreboarders was disrupted by the arrival of a new upstart, Allures … <\/p>\n