Revolver is a 38ft gentleman\u2019s racer drawn by radical thinking octogenarian Bruce Ritchie for his own racing in Sydney Harbour. Crosbie Lorimer steps on board\u201cI wasn\u2019t expecting this,\u201d said Michael Ritchie when his 83-year-old father Bruce showed him the lines he had drawn up for his \u2018gentleman\u2019s racer\u2019. \u201cIt was a nice surprise,\u201d concedes Michael, recalling that he\u2019d expected his father to design a mild-mannered boat with a conventional cockpit, envisioning him ensconced behind a steering wheel.
\nThe epithet \u2018gentleman\u2019s racer\u2019 was certainly not what sprang to mind when I first saw the Ritchie 38 Revolver. Indeed, on first pass the boat had more in common with the fleet of grand prix MC38s berthed alongside her at the Royal Prince Alfred Yacht Club near Sydney than most of the other cruiser-racers on the club\u2019s pontoons.
\nThe low freeboard, wide open stern cockpit with tiller, 2m carbon bowsprit, plumb stem and absence of stanchions all spoke of a boat designed for speed. It was only on closer inspection that the \u2018gentlemanly\u2019 features gradually caught my eye: a fixed carbon jib boom, lazyjacks, sail stacker, timber cockpit floor and no running backstays.
\nThe tack and clew of the jib are permanently rigged to a carbon jib boom sheeted on a track that runs the full width of the boat
\nRevolver is the most recent in a long line of yachts designed by Bruce Ritchie during his 75-plus years of sailing. Starting out in 12ft, 16ft and 18ft skiffs he moved on to sailing 505s (representing Australia in the 1957 world championships) before building and racing the first Yachting World Diamond Class keelboat outside of the UK in 1961.
\nBruce has always taken a very hands-on approach to all parts of his sailing creations: designing and building winch drums, hand splicing wire rigging and even \u2013 when threatened with banishment from a yacht club for racing with a daggerboard in a keelboat division \u2013 building a fire on the sand beside a Sydney Harbour boatshed so that he could melt lead for a composite keel.
\nMany years of successfully representing his country in 5.5m and Etchells keelboats were interspersed with his ownership of numerous cruiser-racers, several to his own design and most bearing the name of his wife, Jan. Bruce even ventured into powerboat design, personally selling one of his Med-style 34ft Cabriolet Royals to Kerry Packer, the media tycoon and fellow Australian.
\nArticle continues below\u2026<\/p>\n
\t\t\t\t\t\tShearwater: Frers 57 custom cruiser-racer harnesses hybrid power<\/p>\n
\t\t\t\t\t\t\tWheeling effortlessly from crest to trough, wingtips kissing the wavetops, the shearwater is Australia\u2019s most prolific seabird and a constant\u2026<\/p>\n
\t\t\t\t\t\tSteinlager 2: On board Sir Peter Blake\u2019s refitted Whitbread champion<\/p>\n
\t\t\t\t\t\t\tIn 22 May 1990, Steinlager 2 \u2013 skippered by Peter Blake and crewed by 14 fellow New Zealanders \u2013 crossed\u2026<\/p>\n
After several decades of racing and cruising their yachts together \u2013 more recently including the Bavaria Match 42 Union \u2013 father and son Bruce and Michael drew up their wish list for what was to become Revolver.
\n\u201cOur requirements were clear,\u201d recalls Bruce, \u201cShe had to look great in the modern sense, plane downwind at 20 knots-plus, sail well to windward, be able to be sailed single-handed, and be able to race with a small crew for non-spinnaker events when required by Michael.\u201d
\n\u201cI want to be able to stand up in a big breeze and go like the clappers,\u201d adds Bruce, who quickly realised that this brief was not going to be readily met by any production boats. \u201cLooking around the world of daysailers nothing grabbed us,\u201d says Bruce, \u201cWe wanted something with a little more oomph to it.\u201d
\nMichael (left) and Bruce Ritchie have enjoyed many years of regatta success racing together in a variety of yachts on the east coast of Australia
\nUndeterred, he set about creating his own design, drawing up the lines for the hull, rig and keel, before handing them to Will Hardcastle of Peter Lowe Design who fared the lines and digitised them. A local kitchen cabinetmaker then cut the ten gaboon hardwood hull frames with a CNC machine.
\nUnconventional
\nThe proposed build method for Revolver was anything but conventional, so the choice of Noakes Boatyard in Sydney was a natural fit for Michael and Bruce\u2019s creation, given the yard\u2019s reputation for combining traditional and contemporary boatbuilding craftsmanship.
\nWith the timber frames for the mould intended to be an integral part of the boat\u2019s structure, Noakes placed the frames in a jig before applying diagonal layers of 3mm, epoxy-saturated gaboon ply: three layers on the topsides, four on the bottom.
\nThis formed the permanent mould, over which the carbon laminate hull form was laid up and vacuum bagged. An all-up, fully rigged displacement of 3,300kg gives some idea of the lightness of gaboon, particularly given the multi-layered construction.
\nThere was an environmental positive here too, as integrating the frames and mould in the final build avoided the waste associated with moulds that are typically discarded to landfill.
\nThe keel can be hoisted up with a halyard if required when berthing in shallower water. The electric engine (which is water cooled through the saildrive) removes the need for seacocks in the hull
\nThe rig and deck layout is simple and efficient for ease of handling; the fixed jib boom and track allows the headsail to be permanently hanked-on and the mainsail is stowed in a stack pack with fixed roller bearing slides on the mast track for ease of hoisting, lowering and reefing.
\nAn Oceanvolt electric engine (which can be charged by a small roll-up mat of solar panels left on the deck overnight) saves weight and adds to the ease of getting underway.
\n\u201cMy boys might jump on and we get her sailing in five minutes,\u201d says Michael, \u201cShe is so light that despite all that sail area it\u2019s really easy to manage the sheets and halyards; I can sail her around on my own in anything up to 25 knots of breeze.\u201d
\nBruce has long been interested in foil design and started prototyping a small fore and aft canting winged keel for his cruiser racer Jan V as far back as 1979 (before Lexcen\u2019s famous winged keel for Australia II). Although Revolver does not sport a winged keel, the bulb design reflects Bruce\u2019s ongoing quest to minimise drag, having a vortex-reducing tracking foil moulded to its aft end.
\nThe keel can also be lifted by a halyard for shallow water berthing, leaving the option for the boat to be moored off the Ritchies\u2019 waterfront property, a short run across Pittwater from the club.
\nIntegrating the gaboon frames and hull mould into the permanent structure makes for a simple interior. The head (seen under the half-decking) was added at the behest of Jan
\nOn the water, father and son have been enjoying success in the local fleet racing, seeing off the Farr 40s in light breezes and mixing it with the MC38s, which, remarkably, are heavier than Revolver. Upwind the boat will readily manage 7.5 knots in 6 knots of breeze, 14-15 knots on a two sail reach and up to 20 knots downwind in as much breeze.
\nWhen I asked Bruce if he had another significant yacht design in him, the energetic octogenarian insisted he was a little too busy for that. \u201cRight now I\u2019m designing a renewable energy floating pod for saltwater power generation.\u201d I wasn\u2019t expecting that!
\nLateral thinking
\nIn 1959, Bruce and Jan bought a cedar-planked 18ft racing skiff. They fitted her with 16-footer sails, closed in the foredeck and made her a stem-headed rig with no bowsprit, but with an iron fin centreboard.
\nJan and Bruce won every race they entered Kunapipi with the Middle Harbour Yacht Club until it outlawed centreboard yachts from racing and banned the couple. Bruce then began converting Kunapipi into a keelboat to be able to race again.<\/p>\n
\u201cI set about designing a new type of low drag, foil shaped, lead weighted fin keel to be built in fibreglass.\u00a0I hand laid up a foil keel over a male cardboard mould in our flat. I designed an insert of 400lb of lead to be hot-cast directly into the bottom of the FRP fin keel. The lead ingots were melted over an open fire on the sand.
\n\u201cI then devised a system to pour two-part, structural polyurethane foam into the remaining space right to the top of the hollow keel. The foam had to be delivered to the beach in two chilled \u2018eskies\u2019 to be mixed and poured immediately into the space. As far as I am aware, this was the very first composite fin keel built anywhere and it worked a treat!\u201d
\nRevolver specification
\nLOA: 11.35m (37.24ft)LWL: 10.25m (33.63ft)Beam: 3.50m (11.48ft)Draught: 2.70m (8.85ft)Displacement: 3,300kg (7,275lb)Mainsail: 56.54m2 (608.6ft2)Jib: 39.68m2 (427.11ft2)Spinnaker: 185.00m2 (1,191.3ft2)
\nThe post Revolver: Bruce Ritchie\u2019s gentleman\u2019s racer blends traditional and modern craftsmanship appeared first on Yachting World.<\/p>\n","protected":false},"excerpt":{"rendered":"
Revolver is a 38ft gentleman\u2019s racer drawn by radical thinking octogenarian Bruce Ritchie for his own racing in Sydney Harbour. Crosbie Lorimer steps on board\u201cI wasn\u2019t expecting this,\u201d said Michael Ritchie when his 83-year-old father Bruce showed him the lines … <\/p>\n