Andy Rice gets top tips on how to use a staysail to turbocharge your boat from Volvo Ocean Race winning skipper Mike SandersonStaysails really come into their own during long periods of strong winds, such as the Fastnet Race. Photo: Carlo Borlenghi \/ RolexAs Mike Sanderson points out, staysails are hardly a new idea. The old clipper ships used to use multiple staysails. However, the past five years have seen staysails become a \u2018must have\u2019 item on high-performance raceboats, not least in the Volvo Ocean Race, where footage of triple-headed VO65s blasting along became some of the defining images of the 2017-18 edition.
\nAs sailors are increasingly looking to gain smaller and smaller advantages in competition, staysail technology is trickling its way further down the sport. Mike looks at which kind of boats are best suited to deploying staysails, and how best to use them on the racecourse.
\nGenoa staysails tend only to appear on the highest performance raceboats that generate significant apparent wind. So here, Mike focuses his tips on spinnaker staysails, which are more applicable to a wider range of boats.
\n1. What\u2019s your angle?
\nIt\u2019s surprising how little you need to ease sheets from close-hauled to start feeling the benefit of adding a genoa staysail. Provided the wind is more than 7 knots, even just bearing away 10\u00b0 or 12\u00b0 from fully upwind means you can start to feel the benefits of a genoa staysail.
\nSpinnaker staysails tend to come into play once you\u2019re sailing at an apparent wind angle between 38-90\u00b0. Provided your boat experiences that kind of apparent wind angle (AWA) with a spinnaker or gennaker up when VMG running, chances are that a staysail will improve your performance.
\nA staysail will continue to work until quite a deep angle, but not when you\u2019re getting close to dead downwind. Once you go beyond 150\u00b0 to 155\u00b0 true wind angle, you\u2019re often better off furling it away.
\nArticle continues below\u2026<\/p>\n
\t\t\t\t\t\tHow to balance speed and comfort when sailing \u2013 top tips from Pip Hare<\/p>\n
\t\t\t\t\t\t\tMost of us now rely on some form of routeing software when sailing offshore. These packages calculate the fastest theoretical\u2026<\/p>\n
\t\t\t\t\t\tHelming downwind: Pip Hare\u2019s top tips on how to maximise your speed<\/p>\n
\t\t\t\t\t\t\tFor me, helming downwind, particularly in big breeze, is one of the absolute joys in this world. It is a\u2026<\/p>\n
2. No penalty power
\nThe beauty of the staysail is that rating rules like IRC and ORC don\u2019t penalise you for using it. It\u2019s measured as a jib, so you\u2019re getting added power for no penalty.
\nOn a Maxi 72, a spinnaker staysail will give another 100m2 of sail area, which powers up the boat more, bringing the apparent wind forward. It\u2019s a very efficient way of increasing the flow across the sail plan, enabling you to sail faster and deeper downwind.
\n3. Use the jib
\nOnce it gets windy on a high-performance boat, you might want to just leave the jib up and have that working as your staysail. If you\u2019re racing on a short windward\/leeward course, the risk of sending the bowman up on a white water foredeck might not be worth it.
\nYou\u2019ll notice that small sportsboats like J\/70s and SB20s tend to keep their jibs flying downwind in most conditions, because it provides added power and improves the flow over the back of the mainsail, just like a dedicated staysail would do.
\nIf you\u2019ve got 100 miles of strong wind straight line sailing ahead of you in a Fastnet Race, for example, then the staysail is a no-brainer. In rough conditions, if in doubt, stick to the jib, and save yourself the potential jeopardy of stuffing up the staysail.
\nOn slower, lower performance boats, you will want to keep the staysail flying for longer, most of the way up the wind range until you\u2019re thinking about using the J4 jib. In many cases the staysail is an easier sail than the jib to handle through gybes as it can be furled.
\n4. Spec your staysail
\nWhen ordering your staysail, we talk about percentage of STL, or the bowsprit length. The longer the bowsprit, the closer to the headstay you can mount the attachment for your staysail.
\nThat\u2019s the case on a Maxi 72, for example, but if you\u2019re operating with a short prod then you will need to mount the attachment further aft along the foredeck. Otherwise it will interfere with the flying of the gennaker and can also be a real hassle for the bowman to get the jib down and furl the staysail \u2013 dealing with the bulk of the jib and the risk of the furler line jamming in the jib and so on. This means you\u2019ve got a trade-off to consider between performance versus boathandling.
\n5. Trim for speed
\nTrim the staysail like you would trim the jib. If in doubt about how much to sheet on, it\u2019s better to have the luff slightly luffing rather than oversheeting it, but really just keep focussed on the telltales, especially around the middle of the sail.
\nIf you have a fixed, non-adjustable sheeting point then you may want to have a series of strops for the tack of the sail so you can adjust the lead position by raising or lowering the whole sail off the deck at the tack, which achieves the same effect as adjusting the lead.
\nAbout the expert
\nMike Sanderson is one of the most respected professional sailors on the circuit, having skippered ABN Amro to victory in the 2005\/06 Volvo Ocean Race and sailed with Oracle in the America\u2019s Cup. These days Mike is chief executive of Doyle Sails and races on board the Maxi 72 Bellamente.
\nFirst published in the February 2020 edition of Yachting World.
\nThe post Staysails: 5 tips on using them to turbocharge your boat speed appeared first on Yachting World.<\/p>\n","protected":false},"excerpt":{"rendered":"
Andy Rice gets top tips on how to use a staysail to turbocharge your boat from Volvo Ocean Race winning skipper Mike SandersonStaysails really come into their own during long periods of strong winds, such as the Fastnet Race. Photo: … <\/p>\n